Garden Tools

If you want to tighten the drive belt on your Cub Cadet, start by lifting the front end of your mower with a jack or blocks. Then, locate the idler pulley on the right side of the deck and use a wrench to loosen it. After that, adjust the drive belt tension rod until the belt is tight enough. Finally, tighten the idler pulley back into place and lower your mower.

Hydrostatic transmission is a technology that helps power your lawnmower or tractor. It relies on oil pressure to transfer power from the engine to the wheels. When this technology fails, it can be difficult to diagnose the problem. We’ll help you understand the signs of a bad hydrostatic transmission and what you can do to fix it.

Mapping out your sprinkler system is an essential step in ensuring that you water your lawn evenly and don’t waste any water. You must map out the locations of your sprinkler heads, valves, and other components to identify areas that need adjustment or repair. Here’s how you can do it yourself.

Engaging blades on a Cub Cadet is really simple. All you have to do is pull the engagement switch or lever located on the control panel towards yourself. Now, whenever you wish to start mowing, just turn on the mower and pull the lever towards you. The blades will start spinning instantly.

Raking leaves is a necessary chore in autumn. But instead of painstakingly bagging them up, try this technique to make the job quicker and easier. Rake the leaves into a big pile, then lay the bag down on one end of the pile. Next, use your rake to scoop leaves into the bag. It works like a dustpan! Pushing piles into the bag directly doesn’t work as well and takes longer.

Flexible garden hoses are a boon for plant enthusiasts, but they often develop leaks and cracks after some time. Instead of replacing them, you can repair them easily. Here’s how you can repair your flexible garden hose in simple steps.

If you have a sprinkler system in your garden, it's important to know which zone each of them is in. This will help you save water and determine the best time to run the sprinklers. To determine which zone your sprinkler is in, turn on all the sprinklers together and mark the end point of each one. The points where they meet are your zones.

To Recoil a Drain Snake, start by wearing protective gloves and placing the drain snake over your shoulder. Next, grip the front edge of the drum with one hand and hold the handle with your other hand. Then, rotate the drum counterclockwise to uncoil the snake inside. Finally, when you’re ready to put it away, rotate the drum in the opposite direction and push down on top to coil it back up.

Starter fluid is a quick-starting fluid that can be used to start your lawnmower when it won’t start on its own. Here’s how to use starter fluid on your lawn mower: 1. Make sure the engine is cool and you’re in a well-ventilated area. 2. Remove the air filter cover and filter. 3. Spray a small amount of starter fluid into the carburetor. 4. Reinstall the filter and cover and try starting your mower again.

Garden pulling tractors are great for maintaining your garden. They help pull heavy objects and do the tiring work on your behalf. If you’re thinking of getting one, we suggest you build your own! Here’s our guide on how to build a garden pulling tractor that suits all your requirements.

Are you tired of watering your plants daily? Installing a sprinkler system is the best solution. But how do you add a sprinkler head to an existing line? Here’s everything you need to know about adding a sprinkler head to an existing line.

Are you tired of watering your plants daily? Installing a sprinkler system is the best solution. But how do you add a sprinkler head to an existing line? Here’s everything you need to know about adding a sprinkler head to an existing line.

While a broken sprinkler wire can be challenging to find, there are a few things you can do to locate the problem area. You can use a wire tracker, which will help you trace the path of the wire and pinpoint the problem. Alternatively, you can also dig up the entire area where the wire is laid, identify the issue, and fix it. The latter method might take more time and effort but is effective nonetheless.

While a broken sprinkler wire can be challenging to find, there are a few things you can do to locate the problem area. You can use a wire tracker, which will help you trace the path of the wire and pinpoint the problem. Alternatively, you can also dig up the entire area where the wire is laid, identify the issue, and fix it. The latter method might take more time and effort but is effective nonetheless.

A sprinkler system is a must-have to keep your garden or lawn hydrated, but it’s equally important to schedule your sprinkler timings. Here’s how you can set the timer on your sprinkler system.